This operation should only be performed while the vehicle is stationary.
Open the door.
To unlock, pull release lever A.
Lift up lever B, then raise the bonnet.
Note: The panel may be hot after the vehicle has been in use.
Unclip the stay and pivot to lodge it in the catch indicated by a yellow arrow.
To eliminate any risk of burns, only handle the bonnet stay using the protective foam.
Check that nothing has been left on top of the engine and that any component that was moved has been correctly repositioned.
Return the bonnet stay to its initial position.
Lower the bonnet carefully, then let it drop shut.
Check that the bonnet is properly secured.
Do not operate the bonnet in strong winds.
Mechanical brake to hold the vehicle when stationary. Applying Pull the parking brake to immobilise your vehicle. Releasing Pull on the handle and press the button A to release the parking br ...
Access to the tools
The towing eye is installed in the boot under the fl oor. To gain access to it: open the boot, raise the fl oor, remove the polystyrene storage box, remove the towing eye from the hold ...
Leaving cruise control mode
Turn thumb wheel 1 to the "0" position: the cruise control mode is deselected. The display returns to the distance recorder. ...