Information for two journeys 1 and 2
A first rotation of control knob A on the steering wheel allows you to display the information for journey 1.
This is calculated (since the last reset to zero of the trip computer) by dividing the distance travelled by the time taken (with the engine running).
This is the relationship between the fuel consumed and the distance travelled since the last reset to zero of the selected journey.
This is the distance that has been travelled since the last reset to zero of the journey selected.
A second rotation of control knob A steering wheel.
allows you to display the information for journey 2.
Journeys 1 and 2 are independent of each other but identical in use.
They allow you, for example, to assign journey 1 for daily calculations and journey 2 for monthly calculations.
Reset a journey to zero
When the required journey is displayed, make a long press on the left-hand control knob A on the steering wheel.
Return to the main instrument panel screen display
Successive rotations of the control knob A on the steering wheel allow you to return to the main instrument panel screen display (vehicle speed), via the navigation information screen, then the screen displaying only the total mileage and the trip mileage (bottom of screen).
Display of navigation information on instrument panel screen
You can display navigation information on the instrument panel screen by rotating the left-hand knob A on the steering wheel.
Towing another vehicle
On the rear bumper, unclip the cover by pressing at the bottom. Screw the towing eye in fully. Install the towing bar. Switch on the hazard warning lamps on the towed vehicle. When t ...
Petrol - diesel manual or automatic gearbox instrument panels
Panel grouping together the vehicle operation indication dials and warning lamps. Depending on the version, the instrument panel may have permanent back-lighting. ...
Turn thumb wheel 1 to the "CRUISE" position: the cruise control mode is selected but is not switched on (PAUSE). Set the programmed speed by accelerating to the required speed, then ...