The trip computer is displayed on the instrument panel screen. It gives you access to:
2 types of instantaneous information:
This information can be displayed in zone B of the instrument panel screen when you switch the ignition on, immediately after the display of oil level and/or maintenance information.
The different information to be displayed is selected by rotating the control knob A.
3 types of information for two journeys 1 and 2:
The distance travelled.
This information is displayed in zone C of the instrument panel by rotating the control knob A.
This is the distance that can still be travelled on the amount of fuel remaining in the tank.
When the range is lower than 30 km (19 miles), only four dashes are displayed.
This is the result from the consumption recorded within the last 2 seconds. This function is only available when travelling at over 30 km/h.
Fuel tank A. Opening the fuel filler flap. To open the fuel fi ller fl ap, pull at its notched edge. There is a fuel label on the inside of the fl ap. Locking filler cap Turn the key a quarter ...
Adjusting the time - Choice of units To adjust the time of the clock and choose the units used by the screen, use the right-hand button on the instrument panel, carrying out the operations in t ...