Towing your vehicle
- On the front bumper, unclip the cover by pressing at the bottom.
- Screw the towing eye in fully.
- Install the towing bar.
- Switch on the hazard warning lamps on the towed vehicle.
- Place the gear lever in neutral (position N for an automatic gearbox).
Failure to observe this special condition could result in damage to certain braking components and the absence of braking assistance the next time the engine is started.
Turn thumb wheel 1 to the "CRUISE" position: the cruise control mode is selected but is not switched on (PAUSE). Set the programmed speed by accelerating to the required speed, then ...
The key operates all the vehicle’s locks as well as the ignition. Note: For safety reasons, a buzzer will sound if you have switched off the ignition and opened the driver’s door without previous ...
In the event of a fault with the brightness sensor, the lighting come on, this warning lamp is displayed on the instrument panel and/or a message appears on the multifunction screen, accompanied ...