Changing a fuse
Before changing a fuse, the cause of the failure must be identifi ed and rectifi ed.
Identify the faulty fuse by checking the condition of its fi lament.
- Use the special pliers to extract the fuse from its housing.
- Always replace the faulty fuse with a fuse of the same rating.
- Check the correspondence between the number etched on the box, the rating etched on the fuse and the tables below.
Installing electrical accessories
Your vehicle’s electrical system is designed to operate with standard or optional equipment. Before installing other electrical equipment or accessories on your vehicle, contact a CITROËN dealer.
CITROËN will not accept responsibility for the cost incurred in repairing your vehicle or for rectifying malfunctions resulting from the installation of accessories not supplied and not recommended by CITROËN and not installed in accordance with its instructions, in particular when the combined consumption of all of the additional equipment connected exceeds 10 milliamperes.
Electronic engine immobiliser The key contains an electronic chip which has a special code. When the ignition is switched on, this code must be recognised in order for starting to be possible. T ...
We recommend you to have this device fitted by a CITROËN Dealer, who will be acquainted with your vehicle’s towing capability and with the procedures necessary for installing a safety item of ...
To open the blind, take it by its central grip A , then pull it backward to the desired position. To close the blind, take it by its central grip A , then pull it forwards to the desired positi ...