Programming

Citroen C3 / Citroen C3 Owner's Manual / Automatic gearbox / Speed limiter / Programming

Turn thumb wheel 1 to the

Turn thumb wheel 1 to the "CRUISE" position: the cruise control mode is selected but is not switched on (PAUSE).

Set the programmed speed by accelerating to the required speed, then press button 2 or 3 (e.g.: 70 mph (110 km/h)).

You can then change the programmed speed using buttons 2 and 3 :

- by + or - 1 mph (km/h) = short press,
- by + or - 5 mph (km/h) = long press,
- in steps of + or - 5 mph (km/h) = maintained press.

Switch off the cruise control by pressing button 4 : the display confi rms that it has been switched off (PAUSE).

Switch the cruise control back on by pressing button 4 again.

    See also:

    Trip computer
    System which provides current information concerning the route travelled (range, consumption...). ...

    Changing a wheel
    Access to the spare wheel Lift the boot floor. Dimension of the spare wheel If your spare wheel is of a different dimension to those on the vehicle (identified by a label), it is essential to u ...

    Diesel particulate filter system
    Complementary to the catalytic converter, this filter makes an active contribution to the preservation of air quality by the retaining of the unburnt pollutant particles. Black exhaust fumes are t ...

    // -->