The lighting commands are issued directly by the driver by means of the ring A and the stalk B .
Model without AUTO lighting
Model with AUTO lighting
A. Main lighting mode selection ring, with:
automatic switching on of the lamps,
dipped headlamps or main beam headlamps.
B. Stalk for switching headlamps by pulling: dipped headlamps/main beam headlamps.
In the lamps off and sidelamps modes, the driver can switch on the main beam headlamps temporarily ("headlamp fl ash") by maintaining a pull on the stalk.
Towing your vehicle
On the front bumper, unclip the cover by pressing at the bottom. Screw the towing eye in fully. Install the towing bar. Switch on the hazard warning lamps on the towed vehicle. Place ...
Luggage cover This conceals the interior of the vehicle in combination with your rear shelf. Installation Take care to insert the fixings A on the frame B. Stowage To access the load area rol ...
Access to the kit
The kit is mounted in the boot under the fl oor. This repair kit is available from CITROËN dealers. It is designed to repair holes of a maximum diameter of 6 mm, only where the puncture i ...